Tag: go9

vehicle tracking devices, fleet, gofleet, go9, gps,

Vehicle Tracking Devices 101: What They Are, And Why Your Fleet Needs Them

Posted on | by Victoria Gole | Leave a Comment on Vehicle Tracking Devices 101: What They Are, And Why Your Fleet Needs Them

Running your commercial fleet requires more than simply sending vehicles from point A to point B. The success of your drivers and your business depends heavily on optimizing the things you can’t see once a vehicle leaves your warehouse. Vehicle Tracking Devices can optimize your fleet by providing real-time GPS updates, collision notifications, and even engine fault detection.

In this post, we’ll break down what Vehicle Tracking Devices are, the latest generation of tracking devices currently available, and how your business can benefit from this advanced fleet protection.

 

What Are Vehicle Tracking Devices?

 

A vehicle tracking device is like the black box of an airplane; it receives GPS signals, collecting and sending navigation data and other critical vehicle information. This small piece of hardware can be as small as a matchbox, or as large as a shoebox.

Most tracking devices come equipped with a SIM-card slot and an On-Board Diagnostics (OBD-II) plug to connect to your vehicle. Once connected, it receives GPS signals and sends vehicle information — such as vehicle location or driver speed — using the internet, satellite networks or cellular services. Tracking devices differ with regards to the data collected, how they attach to the vehicle, and their respective power source. Types of devices include:

  • Factory-fitted Original Equipment Manufacturer (OEM) devices
  • Plug-In devices
  • Hardwired after-market devices
  • Smartphones or tablets enabled with real-time GPS tracking

 

Installing tracking units can be as simple as plugging into a vehicle’s OBD-II port, or may require a qualified technician to connect the tracking device to the wiring harness of the vehicle. Most light commercial vehicles purchased since 1996 already have an internal OBD-II port, often found behind the panel below the steering wheel.

Once connected, GoFleet’s specialized tracking software can collect GPS and vehicle data. It then transmits the data in real-time to a wide variety of pre-programmed devices, such as a cell phone or a computer IP address.

 

Internal Data-Protection Safety Features

 

Each of our vehicle tracking devices has a unique code, known as the International Mobile Equipment Identity (IMEI) number. This allows GoFleet’s patented tracking software to match the unique code of each vehicle, preventing confusion and maintaining fleet management integrity.

The information collected and sent from GoFleet’s tracking devices also has a range of security features that prevent third-party penetration. These cryptographic features include:

  • Data encryption
  • Authenticated end-to-end telematic security
  • Verification of message integrity and unique IMEI tracker codes
  • Non-static security keys, which impede faking a device’s unique identity
  • Firmware with digitally-signed pre-programming to verify the source of updates
  • Validation of technology by independent third-party experts

 

What Type of Data is Collected?

 

GoFleet’s vehicle tracking devices collect and transmit a rich array of information. Even when the vehicle is parked underground or indoors, the telematic tracking unit begins recording the moment the key turns in the ignition.

Using AI and the enhanced data security features, some of the telematic information collected by GoFleet’s tracking devices include:

  • Precise Vehicle Tracking: This includes vehicle location, driving speed, engine idling, trip distance, time markers, driver ETA and more.
  • Fleet Health Assessments: Our software extracts and collects essential vehicular information such as engine faults, odometer readings, service maintenance needs, vehicle VIN, even risky driving habits such as acceleration, fast cornering or harsh braking.
  • Advanced Telematics Capture: Our trackers receive data from a variety of internal vehicular sources, such as the engine, instrument clusters, drivetrain, diagnostics and other subsystems. This allows for methodical and data-driven dashboard reports.
  • Collision Notifications: If a collision is detected, GoFleet’s superior tracking devices use AI and patented algorithms to collect and send detailed forensic data. This allows for forensic reconstruction of road events, including in-vehicle reverse collisions. This data is automatically uploaded from the tracking device, and collision notifications are sent in real-time via email or desktop alerts.
  • Driver Coaching: By providing your drivers with immediate feedback, you can improve fleet integrity and security, reduce risk to your drivers, and encourage immediate corrective action. Visible or audible alerts, as well as spoken guidance, can be given in cases of speeding, excessive idling, or unsafe driver behaviour.

 

GoFleet’s Advanced Vehicle Tracking Devices

 

Below are the latest and best vehicle tracking units available on the global market. They also come equipped for IOX expansion. This means that your tracking system and third-party integration management can expand with your fleet, allowing for scalable telematics solutions and greater fleet flexibility. IOX add-ons include: satellite tracking, driver ID, temperature tracking, hours of service (HOS), dash cam systems and more.

 

GoFleet’s GO9+

 

Welcome to the future of vehicle tracking devices. The GO9+ is the most advanced telematics device on the planet, providing industry-leading insights on the health of your fleet vehicles, as well as trip details, driver safety and much more. The GO9+ provides everything needed for advanced telematic capture and transmission, all in a tiny, compact package.

Best of all, the GO9+ brings its own Wi-Fi hotspot on-board, allowing your vehicle to stay connected to high-speed Internet without siphoning data from individual plans. In addition to reliable Wi-Fi wherever your drivers go, GoFleet’s GO9+ offers the following state-of-the-art features:

  • Unparalleled GPS tracking technology
  • G-force monitoring
  • LTE connectivity and secured communications capability
  • Intelligent in-vehicle driver coaching and alerts
  • Advanced collision detection and notification
  • Expandability of the external device via IOX Technology
  • Built-in gyrometer and auto-calibrating accelerometer
  • Instant vehicle data, including engine and battery health assessments
  • Accelerated GPS acquisition time via Almanac OTA support
  • GPS+GLONASS support and connectivity
  • Advanced native support for a variety of vehicle protocols
  • End-to-end cybersecurity measures, including non-static security keys
  • Easy installation

Recommended for: Small businesses, heavy-truck fleets, corporate vehicles and ride sharing.

 

GoFleet’s GO9 RUGGED

 

If you need a vehicle tracker built for harsh environments, meet the GO9 RUGGED. This device is designed to withstand external installation, protecting against elements such as dust, water, dirt and other solids. 

The GO9 RUGGED builds on the GO Rugged family, providing even more speed, reliability, security features and telematic power. That’s because the GO9 RUGGED is powered by a 32-bit processor, offering 4 times the memory and 5 times the RAM of its predecessor, the GO8 RUGGED. Using GoFleet’s AI algorithms and tracking platform, the GO9 RUGGED can accurately recreate vehicle trips, analyze incidents, provide in-vehicle alerts to notify drivers of infractions in real-time, and provide end-to-end data encryption. Features include:

  • State-of-the-art GPS technology
  • G-force monitoring
  • Simple and sturdy design for covert installations
  • Smart, live in-vehicle driver coaching capacity
  • Industry-leading collision detection and notification
  • Instant vehicle data, including engine and battery health assessments
  • On-board auto-calibrating accelerometer and gyrometer
  • Accelerated GPS acquisition time via Almanac OTA support
  • GPS+GLONASS support and connectivity
  • LTE connectivity and secured communications capability
  • End-to-end cybersecurity, including authentication, encryption, message integrity verification, and non-static security keys
  • Advanced native support for a variety of vehicle protocols
  • Expandability of external device via IOX Technology
  • FIPS 140-2 validated by the NIST
  • IP68 & IP69K certified for protection from water, dust, sprays and other external pressures
  • Does not require a dash-mounted antenna or wire splicing for installation

Recommended for: Fleets using heavy equipment, farm machinery, powered trailers, yellow iron and other major assets.

 

Main Benefits of Fleet Vehicle Tracking

 

GoFleet’s tracking devices provide businesses with the hard data required to ensure smooth operations and peace of mind. Our software works seamlessly with vehicle tracking units to integrate command centre visibility into your fleet operations.

We recommend using tracking devices for businesses that manage fleets of any size, including cars, trucks, limousines, ride-sharing, pickup trucks, trailers, farm equipment, plumbing, roofing or construction vehicles. Our devices are scalable and can connect you to your vehicles, whether you have one or 100.

Among the most prominent benefits to using vehicle tracking devices are improved fleet management and maintenance, enhanced driver safety, lower labour costs, reduced fuel costs and superior theft deterrence. Additional benefits include:

  • Precision GPS technology, eliminating guesswork
  • Live updates and visibility, providing regular updates as often as every 2 seconds
  • An integrated, user-friendly fleet command dashboard; giving you access to your fleet with just a few swipes
  • Individualized regular servicing dashboard with service records for your vehicles
  • The ability to capture and view telematics data such as vehicle speed, direction, and fault codes
  • Asset monitoring, such as temperature data and asset location
  • Immediate 24/7 support for fleet owners

 

Integrated Software and Dispatch Performance

 

GoFleet’s tracking units let you view your entire fleet simultaneously, regardless of their location. Our devices work synergistically with individualized driver management software, letting you streamline and fine tune your fleet’s performance to ensure peak performance and compliance.

Our integrated software monitoring system allows businesses to capture when the driver’s workday starts and ends, displays routes in real-time, and records driver stops — both scheduled and unscheduled. Our data captures also record idle periods, fuel consumption, driving speeds, mileage, and even provides alerts on lost drivers or thefts.

The benefits of our integrated platform command centre to monitor dispatch performance include:

  • Ensuring drivers are on schedule and automatically sharing ETAs with customers
  • Confirming driver HOS & PTO availability, which reduces check-in calls
  • Recording Driver Scorecards and 365-day performance history
  • Alerting to acceleration, harsh breaks and collision detection
  • Streamlining routing options and dispatch management
  • Recording miles-by-state for IFT
  • Assuring FMCSA 395.15 compliance
  • Locating lost drivers and aiding the recovery of stolen property.

 

Ready to Protect Your Assets?

 

With all of the benefits of vehicle tracking devices, can your business afford not to invest in a telematics solution that saves you time, money and resources? Our experts can help you determine which asset tracker best suits your fleet’s needs. Schedule your free consultation and demonstration today. 

shuttle bus, bus eta, gofleet, telematics, gps, vehicle tracking,

How Telematics Can Set Shuttle Bus Services Up For Success

Posted on | by Alexis | Leave a Comment on How Telematics Can Set Shuttle Bus Services Up For Success

If you’ve ever been in an airport, visited someone in a hospital or required private transportation to an event, you’ve likely used a shuttle bus. In today’s fast-paced world, telematics provide benefits to shuttle bus fleets, giving businesses an edge for retaining top-tier employees while providing peace of mind to commuters. Every year, more companies invest in shuttle services; with the right telematics solution, those same companies can also realize improved productivity, visibility and efficiency. 

 

Tracking

 

Vehicle tracking platforms, such as GoFleet’s Bus ETA, provide essential information to drivers, fleet managers and to public citizens to ensure a seamless, automated experience. Ultimately, tracking saves you valuable time and resources, offering a window into your current operations, inefficiencies along routes and reporting features.

 

With the app, passengers can review live ETA data right on their phones, with just one click. They can view current vehicle routes, expected total route time, as well as stop and start points, all in real-time. Automation streamlines these processes by reducing wait times and reducing the number of inbound callers for real-time updates, while fostering goodwill with passengers.

 

Passenger Safety

 

GoFleet has a number of product offerings that can be scaled to your fleet’s requirements, including commercial dash cams such as ZenduCAM. Perhaps one of the best use cases for ZenduCAM resides with shuttle buses. Imagine being able to track passenger safety by ensuring that your driver follows all necessary protocols. Dash cam footage keeps your drivers compliant, keeps your commuters safe, and helps reinforce good driving habits.

 

Vehicle Diagnostics

 

When you use a GoFleet product or service, you’re leveraging a rich telematics ecosystem that can provide all kinds of data sets to improve your business. Monitoring the health and productivity of your shuttle vehicles is an essential part of any holistic fleet solution. Connecting fleet vehicles and fleet managers in real-time and with daily or historical reports for optimum fleet performance.

 

Our GO9 GPS vehicle tracker, for example, not only provides accurate data on vehicle location, speed and trip distance, it can also extract valuable data on a vehicle’s overall “health”, letting you know the status of the odometer, engine faults and much more. Connecting fleet vehicles with fleet managers in real-time helps to gauge when and if a vehicle requires maintenance, track fuel efficiency and reduce the time and frequency of inspections, all of which stop vehicle problems before they start. With the right diagnostics tool, you can easily optimize your fleet’s performance and save money in the process.

 

Telematics data is critical to the success of nearly every type of fleet. GoFleet’s solutions are comprehensive, scalable and offer easy installation and a user-friendly interface. Whether you use shuttle buses to manage guest parking, take travellers to and from the airport or need your commuters to arrive at any destination efficiently and on time, we can help you take full control of your fleet’s operations for better business outcomes. Contact one of our consultants today to see how GoFleet can work for you.

back to school, school bus, student, tracking, telematics, gps, parents

Back to School Brings New Telematics Opportunities For Bus Fleets

Posted on | by Alexis | Leave a Comment on Back to School Brings New Telematics Opportunities For Bus Fleets

This month marks the back-to-school season, offering students across the country a mass exodus from lockdowns and a welcome break from online learning. These new beginnings bring with them opportunities for school administrators and third-party fleet managers to revamp their bus operations using technology and telematics data to make the school year safer and more efficient. Below we’ve listed some of GoFleet’s product and service offerings that are available to both schools and to the public to help keep kids safe.

 

GPS tracking of bus operations with Bus ETA

 

GoFleet’s Bus ETA app marks the first step in safety and communication between parents and their child’s school. Bus ETA is an app that allows school admins to provide live location updates of arriving or departing school buses. 

 

The app also allows parents to track their child’s bus to make sure it arrives/departs on time by allowing the parent to create routes and define which students (or “Travellers”) are assigned to those routes. Bus ETA is updated automatically, so that parents (or “Guardians”) have access to real-time updates on their computers, tablets, or mobile devices.

 

Bus ETA is integrated with ZenduIT ecosystem (same functionality as ZenduCAM alerts) to create and review multiple routes, monitor multiple travellers and allow their guardians to log their information in the event of an emergency. A 2-step verification process ensures safe guardian login.

 

Knowing when and where a school bus will be at any given time — and having that information available on a live app — improves efficiency by reducing wait times and avoids having to wade through a field of update calls from anxious parents. Routing and dispatching can be done quickly, providing a live location for all buses employed by the school and increasing visibility between parents and the school’s administration. 

 

The school can import and manage guardians and travellers while creating and managing routes from the travellers addresses. Conversely, guardians can track several bus routes and travellers from one mobile app while reviewing a history of arrivals and notifications. Ultimately, knowing when and where a bus will arrive allows families to organize their day without the fear of missing a ride to school. 

 

Tracking student safety with GO9 trackers

 

It’s all well and good to know where the bus is, but what if your child isn’t on it? Thankfully, Bus ETA can merge seamlessly with ZenduIT’s tracking system for a more comprehensive (and safer) solution. For example, our third-party GO9 tracker plugs directly into the vehicle to track its routes, and a traveller tag tracks the student’s mobility when used in conjunction with a GO9 + NFC reader. Whether you’re tracking your child’s bus, or tracking the bus and your child, our technology gives schools and parents peace of mind while promoting safe travel to and from school.

 

ZenduCAM for heightened safety

 

Our commercial dash cam solutions provide a wealth of options for fleets of all sizes. Connecting a product such as ZenduCAM to your buses gives you data sets for all kinds of cost-saving and safety-promoting initiatives, including:

  • Accident reconstruction: In the unlikely event of an accident, ZenduCAM helps you determine who was at fault, as well as the events that led up to the collision.
  • Road compliance: Dash cams keep your bus drivers accountable by preventing unsafe driving habits such as rapid acceleration, harsh braking and turning.
  • Passenger-facing cameras can help scan your precious cargo to keep them safe and accounted for.
  • Driver scoring and training: Your dash cam system provides an overall scoring system to help identify areas of improvement, incentivize good driving habits and keep drivers and students safe.

 

When integrated with GoFleet’s rich telematics ecosystem, Bus ETA can help create a 360 solution for schools and bus fleets. Through years of IoT experience, our specialists have a wealth of knowledge and an ability to recommend the right integration of apps and hardware for different verticals. We design, develop and implement premium automation solutions to help drive success — and your vehicles. Contact your GoFleet consultant today and see how we can bring your bus fleet to the top of the class.

shipping times, semi conductors, gofleet

Global Semiconductor Shortage: Impact To Shipping Times

Posted on | by Victoria Gole | Leave a Comment on Global Semiconductor Shortage: Impact To Shipping Times

Due to a global shortage of semiconductor production, many businesses are feeling the effects. Not only are car manufacturers hit by this, but fleet management organizations as well. Which as a result, could impact numerous fleets around the world.

A Deeper Look Into What Caused The Shortage 

In recent news, a semiconductor or computer chip shortage was noted. While there is no definite cause for this, many are accounting the shortage to be a result of various factors which include the following: 

  • Factory shutdowns that happened as stay-at-home orders were put into effect 
  • An increased need of technology required for work-from-home orders
  • A surge in cryptocurrency 
  • The 3G network shutdown prompting fleets to upgrade hardware 

All of these play together to result in there not being enough computer chips for the new development of certain products. While it’s easy to assume the impacts to the production of computers or other computer-chip dominated items, other sectors are feeling the impacts.

 

How Fleets Will Be Impacted 

It is important that fleets in all industries pay attention to these events as it could impact their operations. If there is certain hardware which requires semiconductors, it could mean that fulfillment will be delayed on a global scale.

 

What The Shortage Means For GoFleet Customers

GoFleet customers should keep in mind that Go Devices use semiconductors with the hardware. The computer chip is the core of the device to allow data to be collected and transmitted to the various solutions fleets are leveraging in MyGeotab. Without the chip, the devices would not be able to display real-time information or be interconnected with your fleet.

 


What You Can Do

We are urging our customers to review their yearly plan and factor is the global shipping delays for new hardware. Some delays will be upwards of 60 days and depending on the hardware requirement, it means that fleets will need to put in purchasing orders earlier. 

If your fleet is thinking of purchasing specific hardware for compliance or network updates in regard to the Canadian ELD Mandate or the 3G network shutdown, the global shortage must be taken into consideration.

If you would like to learn more about how the shortage in semiconductors may impact plans for your fleet in 2021, please contact our Success Team today. We will work with you so you can put a plan in place to ensure your organization feels the least amount of disruption.

school busses on the bus stop

Part 2: Telematics Solutions That Work For Any Vehicle Year In School Transportation

Posted on | by Burhanuddin | Leave a Comment on Part 2: Telematics Solutions That Work For Any Vehicle Year In School Transportation

In Part One we discussed how fleets, specifically in school transportation, have buses that include vehicle models of varying years. To read Part One click here.

In Part Two, we will discuss the specific solutions available on the market that school transporters and many other industries can leverage. 

The following solutions work for an entire fleet regardless of the age of vehicles or fleet size. 

 

Bus ETA

The Bus Expected Time of Arrival (Bus ETA) solution addresses the problem of time management between the expected time of arrival and when bus actually arrives. Parents and children can use the Bus ETA app on their smartphones to be aware of the bus’s arrival time and plan accordingly. Parents will now know where their children are at all times and reduce the number of frequent concerned calls.

To learn more, visit: https://stagingms.gofleet.com/product/Bus-ETA 

 

Passenger/Driver Tags

Passenger and driver tags go hand in hand with the Bus ETA solution. Passengers can use these tags to scan when entering or exiting the bus and both parents and the school will be informed. It will reassure the school and parents of what the child’s location status is. When used by bus drivers, fleet managers can know exactly when a driver began a shift or confirm who is driving to ease reporting and organization.

To learn more, visit: https://stagingms.gofleet.com/product/driver-id-nfc-technology/

 

ZenduMaintenance

ZenduMaintenance is an industry leading full maintenance management solution that ensures that fleet vehicles remain in safe and efficient working condition. By leveraging this digital solution that automatically collects engine data that is connected with the already in place GPS tracking solutions like Geotab’s GO9 device, the transition is seamless. It’s a quick and easy solution to reduce breakdowns by improving maintenance efforts.

To learn more, visit: https://stagingms.gofleet.com/product/zendu-maintenance

 

GO Talk

While maintenance management solutions will reduce technical faults, it’s important to remember to also focus on communication solutions. Not only can these solutions keep drivers alert on the road with audio alerts, but drivers can also have two-way conversations if an unexpected event occurs. With GO Talk, school transportation drivers will be alerted of pickup or drop off changes as well as receive recommendations on how to improve driving habits in real-time.

To learn more, visit: https://stagingms.gofleet.com/product/verbal-driver-feedback

 

ZenduCheck

With the ongoing pandemic, digital symptom monitoring solutions are in demand for schools that are open and are allowing for in-person education. By leveraging this solution within school transportation, fleets can ensure that drivers are not only healthy and symptom-free while completing their routes, but that children who are entering the bus are symptom-free as well. ZenduCheck works by prompting individuals to complete a screening survey and even works as a contract tracing tool if an individual is tested positive for the COVID-19 virus.

To learn more, visit: https://zenduit.com/protect-your-fleet-with-health-status-monitoring-solutions/

While this is just a short list specific to school transporters, these telematics solutions can be used by fleets with vehicle models of varying years and can include many others beneficial solutions. For more information on any of these solutions or for more information about how your unique fleet should be leveraging new technology that works with any model vehicle, contact us today. 

Utilisation of Your Tech Stack

Maximize Your Existing Tech Stack To Get Ahead In 2021

Posted on | by Victoria Gole | Leave a Comment on Maximize Your Existing Tech Stack To Get Ahead In 2021

As businesses round up the year, it’s the perfect time for teams to perform a review of business operations. This allows management to see what processes and projects are working towards their long-term goals and how their finances stack up. When it comes to fleets, the process is no different. However, in addition to reviewing processes and projects, it’s critical for fleets to see how they can utilize their existing tech stack to help them further get ahead.

 

2020 Overview: Adjusting To A New Normal 

2020 was a unique year. For many, it was the first time they truly expected industry uncertainty and long-haul transporters definitely went through a moment of change. As regulations, demand and driver processes were adjusted, with the right driver and utilization of tools, teams were able to power through it. 

For nearly all fleets, 2020 caused operations to change by increasing health and safety protocols, PPE and more. Some fleets also decided to put attention towards their current processes and technologies within their fleet by focusing on using performance or finance boosting tools. Some found this easy to do as they leveraged their existing tech stack. 

As a result, leveraging existing tech stacks is a critical recommendation for all long-haul transporters, to help them get ahead in 2021.

 

Leveraging Telematics And Connected Networks Already In Place 

Nearly all fleets are already digitally connected by some form of a GPS or fleet tracking device to optimize routing, complete routes efficiently and to monitor hours-of-service (HOS) or driving times. 

When looking to maximize existing tech stacks, it’s important for fleets to leverage these already in place networks that connect to already installed hardware. Doing so will immediately increase route completion performance. 

One advantage is to leverage bypass programs that require no hardware as installation is digital. Regardless of where vehicles are, operations can change for the better almost immediately. During a time where social distancing and PPE measures are heightened, this is a major benefit. 

 

Leveraging A Tech Stack With GO9 Devices  

Fleets that are fitted with Geotab GO9 fleet trackers are used for several reasons including GPS tracking, HOS tracking and engine diagnostics. These already in use devices can also leverage the connected network it relies – by installing the unique Drivewyze Weigh Station Bypass Program fleets can truly meet global expansion dreams. 

While Drivewyze did not invent the weigh station bypass program, they did modernize it. By leveraging relationships and connected networks, they were able to implement a program where over 47 states and provinces allowed them to operate by using the safety scores of fleets, as well as other credentials, to allow vehicles to have a green light to pass and not have to pull into weigh stations. 

 

A New Efficiency Tool: Hardware-Free Weigh Station Bypass Programs 

A weigh station bypass program works by using vehicle GPS location data from a GO9 device in correlation to the GPS location of weigh stations, as well as unique weigh in motion scales strategically embedded in highways prior to a station. If a weigh station is participating in the program, the vehicle will have their fleet information and weight calculated from the motion scales automatically and this data will be cross referenced against screening rules to determine whether they are required to pull in. Typical screening rules include: 

  • Fleet safety score
  • Weight of vehicle while approaching station 
  • IFTA payment completion 

Many fleets find that they are authorized to pass stations approximately 98% of the time, immediately resulting in saving resources and time. In fact, most fleets report approvals of preclearance more often than not and notice a near immediate ROI when a truck receives just one or two bypasses a month. For drivers who find they are held up at weigh stations this is a game changer. 

 

Weigh Station Bypass Programs In Real Life 

Over the last year, weigh station bypass programs have thrived as they have been leveraged by fleets to streamline workflows when it comes to driver delivery times. When speaking to Drivewyze’s Weigh Station Bypass Program, they remained agile when encountered with recent pandemic restrictions. 

 

The COVID-19 Shutdown 

During the COVID-19 pandemic many cities and countries shut down for a period of time, resulting in various businesses being closed or services being halted. For long haul trucking, it was felt most as several truck rest stops and weigh stations were closed for a short period of time. As a result, many drivers were unsure of where they could safely stop to rest so resources were overused and HOS records were affected, as they drove around looking for a safe place to stop.

To help long haul fleets, Drivewyze accelerated their development of new features to automatically allow their systems to monitor the location of open rest stops and even provide data on their capacity level.

 

Becoming Part Of A Response Plan 

During the COVID-19 pandemic, many offices were instructed to enforce remote working options when possible. For some fleets, as part of their response plan, they took this time to proactively work towards upgrading their fleets by enrolling them into a bypass program. Because the program is completely digital and is free of hardware installation, the implementation of Drivewyze’s program was able to happen instantly. This resulted in improving operational efficiencies and social distancing measures as they did not have to pull off the highway into a weigh station.

After this unexpected year that many fleets have had, it’s hard to tell how 2021 will be. It’s critical for long haul fleets of all sizes to do what they can to elevate their existing tech stack to help them remain successful in the new year.

To learn how weigh station bypass could benefit your fleet, speak with one of our long-haul transportation specialists about receiving a Weigh Station Analytics report to see exactly how much time and money your fleet could save, or inquire about a free trial to experience the service in-cab.

 

Written by: Victoria Gole, Marketing, Branding & Communications Specialist at GoFleet

Contributions by: Doug Johnson, VP of Marketing at Drivewyze

winter operation programs, winter, snow plow, gps, telematics, winter operation departments

What’s On The Horizon For Winter Operation Departments

Posted on | by Victoria Gole | Leave a Comment on What’s On The Horizon For Winter Operation Departments

As the weather begins to get colder and with many cities around the world already seeing snow, it’s time for winter operation programs to kick their initiatives into full gear. For many departments this includes performing comprehensive research on how they can improve their efforts. 

Sound familiar? Keep reading as we will discuss the various factors that winter maintenance fleets must stay on top of and how new technology is critical in their success. 

 

How Some Winter Operation Departments Are Falling Behind 

Depending on several factors including budget, need or even manpower, some winter operation fleets fall behind in terms of leveraging smart technologies. What this means is that many fleets may not be utilizing new strategies, initiatives or technologies. As a result, certain operational efficiencies are automatically lost causing a decrease of productivity, optimization, and visibility.

What should winter operation programs look out for to know whether this is happening to them? 

First, they should look at the operations of their competitors or the industry as a whole. This is a critical first step to easily see whether you’re behind in certain areas. Fleets should look out for the following: 

  • How other municipalities or fleets can share mapping information publicly on a visible and modern map solution 
  • How other teams are maintaining workflow and reporting easily and efficiently 
  • Productivity or costs that are quickly diminishing 

Next, teams should research best practices online and see what the conversations surrounding new initiatives are. 

 

Things That Every Fleet Needs To Know About 

Things are constantly changing – it’s evident. However, it’s important to know what GoFleet, an industry leader in 360 fleet solutions, has observed and thinks is important for fleets to know about.

 

Smarter Software Than Just GPS 

Certain software solutions are already widely used. Often this incorporates basic GPS tracking solutions to ensure the location and route of a vehicle is known. This allows on a basic level, for teams to monitor compliance and route completion. 

Where things get innovative, is when software is leveraged to utilize this GPS data to monitor more data. Pushing data into software with algorithms that leverage GPS information visually is how the data can be displayed publicly. Often this is via an embedded code on a website that automatically pulls real-time information that the fleet pre-categorizes to be available to the public. By doing this, it allows winter operations departments to be transparent so civilian drivers can better plan routes and ensure that safe roads will be used for travel. 

Additionally, this map data can be manipulated to show compliance on an internal level. Efforts can be reviewed for efficiency and steps can be taken so roads are cleared in adequate times. Reports can also be created to prove that compliance is met at all times. How is this possible? Geofencing – a tool which divides map locations into zones to section off tasks or designate tasks and routes. 

To summarize, connected software solutions allows for the following to be completed within winter operation fleets:

  • Vehicle optimization and fuel usage reports to ensure efficiency  
  • Fleet compliance to regulations in regards to snow clearing 
  • Driver behaviour reports to ensure safe driving is monitored 
  • Resource utilization reports to monitor quantity and location span of where resources are used – this can include fuel, salt and even sand 
  • Geofencing to track progress, next routes and restrictions 

 

Connected Hardware Options

Hardware may seem obvious, it’s not that simple. There’s more to hardware in winter department fleets than one may think. By leveraging connected hardware solutions and sensors to track pre-existing hardware, even more intel can be collected on fleets – this is a necessity for winter departments reviewing current operations. 

By leveraging connected hardware, more data can be collected. Meaning the above points related to software solutions can in fact be accurate so proper actions can be executed. Not only does this include GPS tracking such as the GO9 device, but also a dash camera system, driver ID system and much more. Integrating these products and connecting them internally allows for the following: 

  • The GO9 monitors HOS compliance, GPS location, engine performance and more
  • Dash cameras can monitor and record not only driving events or accidents, but whether the driver is attentive to the road ahead
  • Driver ID systems ensuring that the right driver is operating the proper vehicle and the timing of shiftwork 

For aspects of the vehicle that don’t allow for an initial connected piece of equipment like plows, salt or sand dispensers, sensors can be leveraged. Installing smart sensors to track various vehicle actions or tasks ensures complete visibility. In regards to winter department vehicles, sensors monitor when plow equipment is used – proper tracking of route and work commencement can happen as the sensor will detect when the plow is truly in operation (being down or up). As well, sensors can display a proper picture of resource utilization throughout a route and whether certain locations were over or under served. This ensures resources are not wasted to keep costs low. 

 

Have All Of This In Place? This Is What Is On The Horizon… 

If you’re one of the winter department operations who have all of this in place, it’s still important to stay up to date with future trends. This will ensure that your team is prepared with new tools and strategies in upcoming seasons. The following is predicted to be introduced: 

  • Intelligent camera technologies will use artificial intelligence (AI) and machine learning to improve data collection from equipment via smart city networks 
  • The environment will become a larger focus as electric snow plow vehicles are leveraged to reduce carbon emissions and lower operational costs 
  • Vehicle-to-vehicle and vehicle-to-infrastructure communication will evolve on a 5G network that will provide fast lines of communication 
  • Operations can be automated as autonomous vehicles are introduced to eliminate human error and costs 

While much of the information stated above is directly related to winter operation departments, the same technology and thinking will be seen in other industries. If you’re interested in learning more about how your fleet, regardless of the industry, can improve or better prepare for future technical challenges, contact us today. 

COVID-19 Recovery: Why Your Vehicle Data Is More Essential Now

Posted on | by Anna | Leave a Comment on COVID-19 Recovery: Why Your Vehicle Data Is More Essential Now

The past few months have been an unsettling time for many workplaces as the COVID-19 pandemic has drastically affected businesses. Since this global pandemic started, Geotab recorded and reported on datasets to help fleets better understand the current landscape. As we are on the road to recovery, it is important for businesses to review how the commercial transportation sector is performing in relation to their own performance. Reviewing industry trends alongside personal vehicle data can allow fleets to make actionable decisions moving forward. 

Below we use Geotab specific data that was updated on May 29, 2020, to help our readers better understand current commercial transportation activity, industry-specific activity, and fuel fill-up activity in relation to their operations. 

 

Commercial Transportation Activity: A Slow Increase 

With a baseline of February 2020 being used, it is clear to see in the image below that in comparison to the lowest dips in April 2020 (when many cities were in peak-response to COVID-19), there is a slow increase happening across the world. This is seen specifically in Canada, the United States, the United Kingdom and Australia. While there appears to be a rise and dip effect occurring, many view it to be a good sign that the dip does not last for long, as well that the rises are gradually increasing. 

Source: Geotab 

When speaking about the future, many believe that when businesses begin to reopen, their activity will drastically affect this graph. It is predicted that with more businesses reopening and requiring more inventory, stock or supplies, more vehicle use will occur. 

 

Industry Vehicle Activity: What Is Happening During The COVID-19 Recovery

 

While the above graph may show positive signs that vehicle traffic is increasing, it’s important to note that it is not the case for all industries. Since February 2020, there are a number of industries where vehicle activity has not recovered as much as others in North America. These industries include non-freight transportation, healthcare services and business services. Many account this lack of recovery to be due to many unique businesses not reopening, or being unable to reopen to full-productivity. An example where this is visible is in the public transportation sector which has seen a continual decrease in activity as public transportation use is low (possibility as a result of the public not commuting to work as they are working from home). 

Source: Geotab 

Some industries to highlight that are steadily increasing are construction, government, freight transportation, retail and telecommunications. This slow increase is typically due to the reopening of many businesses that could no longer hold off operations and were approved by governments to slowly reopen. For example, within the construction industry, the longer work was paused, the longer the delays for construction to be completed. When speaking about condo developments or other development projects, many companies could not financially afford to hold off construction due to financial and contractual responsibilities to home buyers. 

 

Fuel Fill-Up Activity: What Increases Can Mean 

In North American the vehicle telematics data gathered by Geotab confirms that fuel fill-ups of varying larger-sized vehicles are increasing. The data shows that since the end of April, there has been a noticeable increase in the usage of LDT (light duty trucks) and MDT (medium duty trucks) vehicles. This is likely in accordance with traffic increases for industries who are looking to resume operations. It is important to note however, that there are some vehicles such as MPV (multi purpose vehicle), passenger and bus that may not see such increases in fuel fill-ups until there are less restrictions on public contact and public outings. The steady increase in varying industries is important to monitor because it allows for vehicle-based businesses to see how their specific industry is performing overall. 

Source: Geotab 

 

What Your Vehicle Data Means 

Properly Collecting Data 

With all of this information available, it’s important for businesses to use it to their advantage. Specifically, by reviewing the vehicle telematics data of their own business in accordance with industry competitors. By using telematics solutions businesses are able to review current operations and see whether their organization is on par with industry trends.

 

Collecting Your Own Data 

In order for businesses to truly see results from the data gathered by Geotab, there must be processes in place to collect information related to their fleet. If no solutions are currently in place, or businesses are unsure about what should be used, the first step is to use a GPS tracking device like the GO9. For the purpose of this discussion, the GO9 can be used to record the GPS location of vehicles and depict usage within detailed reports. As well, it allows for easy add-on hardware through an IOX expansion port to allow for future tracking of HOS ELD, auxiliary, temperature monitoring as well as other third party monitoring solutions.

 

An additional tool to use to properly measure against the industry trends mentioned above, is to implement a fuel card integration. Using a tool like FuelBi allows fleets to better track the fuel fill-ups of company vehicles. While the device initially focuses on tracking and visualizing important fuel KPI’s and transactions, it is also used to monitor how frequently company vehicles are being filled. This directly shows the usage of company vehicles.

 

Comparing Company Data To Industry Data

When businesses reach the point that they have accumulated enough data to properly view how their fleet is performing, it can then be compared to the industry trends above. After reviewing the data in accordance to current industry trends, business owners and managers are encouraged to adjust their operations accordingly. What this means is that if businesses see that they are performing at a lower rate than their industry, they need to research why. Sometimes a lack of operational customers or possibly a decrease in availability of your team are the answers. As there are various reasons for why your business may not be recovering from the COVID-19 pandemic at the same rate as competitors, it’s important to work with professionals who can point out why this may be happening and offer solutions that drive results. 

Interested in working with a team who can help? Contact GoFleet today. Our team is experienced in data analyzation and consultation as our goal is to have every customer outperform their competitors. 

A Strategy To Reduce Fleet Collisions

Posted on | by Anna | Leave a Comment on A Strategy To Reduce Fleet Collisions

When businesses require a fleet of vehicles to move their products from one location to another, it’s critical that they are focusing on promoting safety while on the road. When they are not doing this, sometimes drivers can accidentally drive in dangerous ways. Putting everyone on the road around them at risk. With technology improving to boost safety and reduce fleet collisions, managers and business operators must use it to their advantage.

 

Where The Concern Comes From 

 

Any vehicle accident is concerning. However, when a commercial motor vehicle is involved, sometimes the outcome of the incident can be much worse. As the size of the vehicles and the cargo carried are factors into making the collision worse for all parties involved, it sheds light on why commercial trucking is considered to be in the top 10 most deadliest jobs. In fact, in 2017, FMCSA reported that there were approximately 450,000 police-reported crashes involving large trucks. 

 

With the most common fatal accidents being transportation incidents, managers and drivers themselves can’t be forgoing certain precautions to reduce the risk of collisions and accidents. Below we list various ways fleet employees at every level can do their part to reduce fleet collisions. These tips must remain top of mind as by 2030, it is predicted that road crashes will be the fifth leading cause of death in the U.S. 

 

Commitment From Management 

 

Firstly, in order to reduce fleet collisions, there must be a specific level of commitment from management in regards to maintaining safety. This means that management must continually put the right enforcement in place. This can vary from strict policy to the adoption of new technological solutions, and everything in-between – all of which we touch upon later in this article.  

 

How Managers Can Reduce Fleet Collisions In Their Fleet

 

Enforcing Strict Policy

 

Strict policy enforcement by management is critical to lowering the risk of collisions in fleets. As fleet drivers represent a business, they must act responsibly and abide by company policy at all times. This includes when commercial vehicle drivers are behind the wheel of a company vehicle as they travel to a new work site or when they are delivering cargo. Such policies should look to reduce any risky behaviour like; distracted driving, driving under the influence (regardless of if the substance is legal), driving tired, or even driving over the set hours-of-service (HOS) in your country. 

 

While some of these policies could be hard to enforce and rely largely on trusting your drivers, it’s important to know that there are technological solutions available to help you! When monitoring the behaviour of your drivers, there are innovative dash camera solutions available that use facial recognition to watch facial movements as well as the vehicle movement on the road. So when a driver appears to be distracted, under the influence (swaying over the line), or even tired, managers can be notified to make contact with the driver to ensure they are okay to drive. As well, many ELD and GPS tracking tools like the GO9 device are designed to track not only driver movement, but compliance to HOS. So drivers are well aware whether they are compliant.

 

Pre-Trip Inspection And Proper Maintenance 

 

In addition to enforcing strict policies, managers must also reiterate the importance of keeping company vehicles in tip-top condition. This includes not only educating drivers on how to perform proper pre-trip inspections of vehicles, but scheduling maintenance so all commercial motor vehicle parts are in good condition, are working properly, and are safe to use. Doing this can lower the risk of a collision (that is caused by malfunctioning or broken parts). Such inspections should look at visually checking the engine, checking fluid levels, the wheels, the brakes, and more. A more extensive list about what should be checked can be found here. 

 

 

If a vehicle is placed on the road when there is a pending problem that requires repairs, it places the driver and others around the vehicle at risk. One way to combat the issue of poor maintenance is to use a maintenance management software solution. Solutions like Zendu Maintenance monitors not only the activity of the vehicle but it places the data in algorithms to determine and schedule when preventative maintenance should happen.

 

 

Proper Incident Investigations And Training 

 

As briefly mentioned, to reduce fleet collisions, managers must not only offer the right training, but complete proper investigations into driving incidents when they are reported. This includes using all of the available data and reports to determine what the cause of the incident was and put efforts in place to reduce the likelihood of a similar incident happening again.

 

For example, if an incident occurred because your driver was distracted and speeding while on the road, you can review dashcam footage as well as engine data to confirm the speed they were travelling at, as well how they were distracted (whether they were looking at scenery or even a mobile device). After this is confirmed, the information can allow for a new training module to be created and assigned to the driver to complete. This ensures that they are aware of how their behaviour puts themselves and others around them at risk, while showing how they can act more safely. 

 

Encouraging Safe Driving Habits

 

Similar to the above tip of management conducting proper investigations into driving incidents and implementing new driver-focused training, management must also encourage overall safe driving habits! This means constantly having drivers review training material surrounding this topic, sending out internal communication with tips or even conducting one-on-one driver driving to highlight poor driving trends that are happening. 

 

Some safe driving habits that can reduce fleet collisions are: 

  • Following distance while driving
  • Maintaining visibility 
  • Anticipating turns 
  • Keeping attention forward

 

 

Tech Adoption Via Telematics

 

The last way management can reduce fleet collisions is to adopt and embrace new technologies. This not only speaks to hardware solutions that have been designed to boost safety (such as dash camera solutions or electronic logging devices) but telematics software solutions as well! While some newer commercial motor vehicles are being fitted with such innovative tools while at the factory through OEM (original equipment manufacturer) programs, it can still happen for fleets with older vehicles. There are now a number of simple-to-install plug-and-play style devices that can have software solutions integrated via satellite connectivity. Such hardware and software can automatically collect data about the trip route and driver behaviour so management can always know how their drivers are performing. So when an incident happens and management is alerted by the telematics solution, they can quickly and efficiently address it. Not to mention, there are innovative devices that can be installed within vehicles to monitor the road ahead, alerting the driver if the sensors detect a possible collision coming. 

 

Safety should always be a top priority in fleets regardless of their size or purpose. Whether the driver is transporting large amounts of cargo or the driver is a technician who is travelling to their next site visit, you can’t risk them behaving dangerously on the road. With the above tips management should have the right insight to begin to reduce fleet collisions. However, if you’re looking for a little more guidance in how you can increase safety in your fleet to reduce accidents and dangerous behaviour, contact us today! With our experience and knowledge of nearly every industry, we’re confident that we can address all of your safety concerns with cutting edge technology.